It is one of the last things you see when you leave your house and the first thing you see when you return. You might not think about it, but your garage door needs some maintenance to keep it running smoothly. With proper maintenance and care, your garage door will perform reliably for years to come. Make testing and monthly inspection part of your routine. You can quickly perform some garage door safety and maintenance task on your own. If you are not comfortable performing the test, have a professional perform them for you.

Taking care of your garage door is compiled of some several practices. This post will help you outline some them.

1-Cleaning

Cleaning the exterior of the door is an essential maintenance tip. Mix detergent and the water and wash the door with a soft, spongy cloth. You perform this at least once in a year or more if you live in a salty area climate. Once it is washed rinse with some clean water.

In addition to that, you should watch your door at least once a year to see if it needs to be stained or repainted.

It is a good idea to do a safety check every few months or so. Make sure that your rollers, springs, and tracks are operating correctly.

2-Visual Inspection

Look at the garage door cables, springs, rollers, hinges, pulleys and other garage door hardware for any signs of torsion. If you get suspicious of any problems, have a qualified professional do some repairs. Make sure all the bolts are tight. If you see a bolt that is painted red or have a safety tag on it, this part is under high tension and only should be adjusted by an expert.

3-Check the door balance

Disconnect your garage door opener from the power supply and disengage it from the door. Raise it to about waist level and reduce it slowly. If the door raises or lowers, it is not balanced properly and need to be adjusted.

4-Lubrication

Lubricate the moving parts of the door regularly. However, do not lubricate plastic parts of the garage door such as plastic idler bearing and plastic rollers. Typically, a non-silicon lubricant is recommended.

5-Force setting test

Push your garage door openers wall button or transmitter to close the door while it is fully opened. Hold up the door with your hands stiff and outstretched as it is closing. Pull your hands away immediately if the door does not reverse and continues to close. If the closing force is in excess, then it should be examined by a San Diego Garage Door Experts technician.

Conclusion

Torsion springs are normally subjected into high tension. If they need to be repaired or replaced, leave that to a trained technician. However, if your door uses extension springs, you can find parts.

The best way of maintaining the garage door opener remote is by using the user’s manual. Review the owner’s manual for the garage door. If you don’t have one, look at the number on the back of the door or other hardware for manufacturers name and request for a manual.

After garage door installation, care and maintenance are crucial for its durability.

For more business information, you can visit see at-

Davegi

n49